Packing Information

Pcs/Carton: N/A

Packing Size/Carton:N/A

Packing Vol/Carton: N/A

N.W./Carton: N/A

G.W./Carton: N/A

QTY in 40HQ: N/A

QTY in 40GP: N/A

QTY in 20GP: N/A

KN95 activated carbon with respiratory protection respirators for occupational exposure limits up to 10 times the occasion, the use of high-performance filter and special effects activated carbon odor layer in addition to effectively remove the odor, unique design of the breathing valve can reduce heat and moisture Accumulation, so that breathing more smoothly. Dimensional cup cover design, increase the internal space, wear more comfortable.

Mainly used to prevent non-oily particles of dust: such as casting, laboratory, primer, cleaning, chemical pesticides, solvent cleaning, painting, printing, electroplating, electronics, food processing, automobile shipbuilding, Environmental disinfection, grinding, sawing, bagging, coal, flour dust, metal, wood processing, pollen and other solid non-oily substances.

For more information on these masks, contact the instructor or manufacturer.
1. Failure to follow the instructions for use of this product or to use it beyond the limits of use, or to wear it while handling harmful substances, will reduce the protective function of the product and may result in illness or even death.
2. Before using this product, the wearer must be trained to understand the correct safety and health standards to wear a mask method.
3.OSHA standard includes 29CFR1910.134 (e) (5) and CSA standard Z94.4-93, the user need to do wearing a leak test.
4. Discard the mask or replace it with a new one (excessive clogging causes difficulty breathing for the wearer;
5. If you feel dizzy, irritation or other discomfort, please leave the contaminated site.

Each time you wear a mask, follow these steps:
1. Holding the mask, fingertips in the nose clip position, so that headband free fall.
2. Set the mask over the face, while ensuring that the nose of the mask snaps against the nose to ensure adhesion.
3. Pull the lower band to the neck, behind the ear, and pull the upper band over the upper back of the head.
4. Use both hands to adjust the shape of the nose to ensure adhesion.
5. Wear test: cover your mouth with both hands, breath, if there is a sense of gas from the nose exposed, tighten the nose clip; if the air leaks from the edge, re-adjust the headband to ensure close.
Adherence to wear check as follows:
 • Cover your face with both hands but do not move the mask position.
• The mask is equipped with a dedicated cold-flow breathing valve for quick inspiration (negative pressure inside the mask).
 • If you notice a leak, reposition the headband.

Restrictions on Use
Do not use masks when entering the following polluted environment:
• This product does not produce oxygen, can not be used in the oxygen concentration of less than 19.5% of the anoxic environment;
• Prevention of gases or vapors;
• Can not be used in environments where the pest is unknown or concentration is imminent and life-threatening;
• Can not be used where the contaminant concentration exceeds OSHA standards, or governmental regulations, or where the concentration of the hazardous substance exceeds the occupational exposure limit of 10x.
caveat:
Do not use this product when facial beards, hair, or other conditions affect the adhesion between the face and the mask gasket.

Packing quantity: 15 pcs / carton x12 box = 180 pcs / carton
Carton size: 430mmx265mmx430mm