操作步骤：

--修剪甲型，清理甲面，涂底胶，照灯（UV1分钟,Led30s）

--选择合适的甲模，用双头笔取出适量延长胶，沾取适量防粘水，将延长胶均匀涂抹在甲模上，涂好的甲模盖在指甲上（UV1分钟,Led30s）

--卸除甲片，打磨适合甲型，涂封层，照灯（UV1分钟,Led30s）

产品重量:37g

产品清单:延长胶30g*1

注意事项：

1、选甲模的时候，不要选太大或者太小的甲模，应该选刚好盖住真指甲的甲模，否则可能出现涂好胶的甲模贴合时出现翘起的现象
2、使用光疗笔取胶，可根据所要延长的长度把胶均匀涂在甲模上，不要涂太薄，甲模两侧需要涂抹完整厚度与中间部分相同

【关于发货】下单后，需要排单生产，一般两天内发货，节假日延迟，（正常当天发货）。

【关于色差】由于拍摄环境及电脑显示器等原因，稍许色差难以避免，请理解！

【关于定制】请咨询客服，定制价格有竞争力 

1)
1. File the nail surface lightly
2. Apply a very thin layer of base coat, and cure it under UV/LED lamp.
3. Select a suitable shape & size false nail tip.
4. Apply AcrylicGel on nail mould, use nail art pen to make gel smooth.
5. Stick it to your real nail and make sure it fully plying-up, and cure it under UV/LED lamp.
6. Remove the false nail tip, trim the shape and polish your nails.
7. Apply top coat and cure it under UV/LED lamp.
8. Design your nail with your satisfied patterns.

2)
1. File the nail surface lightly
2. Apply a very thin layer of base coat, and cure it under UV/LED lamp.
3. Put a nail form on your nail and apply a layer of Builder Gel, cure it under UV/LED lamp.
4. Apply a second layer of Builder Gel and cure it under UV/LED lamp.
5. Trim the shapes of nails.
6. Apply top coat and cure it under UV/LED lamp.
7. Design your nail with your satisfied patterns.