The vacuum feeding machine uses electric vacuum pump to produce vacuum which directly sends the material to the destination .It reduces human labor and avoid powder pollution .
Model
Transport capacit
(kg/h)
power
(KW)
size
(mm)
weight
(kg)
RZVC-11-DD/075
500
0.75
φ 300*870
50
RZVC-11-DD/220
1000
2.2
φ 300*870
60
RZVC-11-DD/550
2000
5.5
φ 300*870
60
RAVC-21-DD/075
200
0.75
φ 200*720
50
RAVC-21-DD/220
500
2.2
φ 200*720
50
RAVC-21-QD
200
-----
φ 200*720
40
Feeding procedures:
press the power switch . The spiral air pump starts ruming and produces vacuum.
The reversing valve moves and connects the air pump to the hopper .Meanwhile,the exit door is closed and vacuum is produced.Then the material sucking is started.
The materials enter the feeding room.
After material sucking is finished ,the revering valve is off. The air pump is disconnected with the hopper. The exit door is open and the materials enter the receiving room
When this is over, the back flushing mechanism works and ejects the air and
cleans the filter.once cycle is over
Our company:
our office building
Our scientific research cooperation base
Our factory
FAQ:
1. What it does?
a:Separate solids from liquids or segregate dry materials into various sizes. 2. How it works?
Vibration is accomplished by eccentric weights on the upper and lower ends of the motion-generator shaft. and The angle of lead given the lower weight with relation to the upper weight provides variable control of the spiral screening pattern. 3. Any self-cleaning devices on the sieving machine?
Yeah, Bouncing ball or Ultrasonic system could be installed. 4. How many kinds of material are supported?
A. All stainless steel (201, 304, 316L)
B. All carbon steel Q235A
C. Contact part Stainless steel. 5: How long is the warranty?
The warranty is 12 month(except the wearing parts includes sealing strip, bounce ball and sieve mesh, etc.). Because different usage, the wearing parts will have different life.